Prince George's County |
Code of Ordinances |
SubTitle 27. ZONING. |
Part 7. INDUSTRIAL ZONES. |
Division 2. SPECIFIC INDUSTRIAL ZONES. |
§ 27-469. I-1 Zone (Light Industrial).
(a)
Purposes.
(1)
The purposes of the I-1 Zone are:
(A)
To attract a variety of labor-intensive light industrial uses;
(B)
To apply site development standards which will result in an attractive, conventional light industrial environment;
(C)
To create a distinct light industrial character, setting it apart from both the more intense Industrial Zones and the high-traffic-generating Commercial Zones; and
(D)
To provide for a land use mix which is designed to sustain a light industrial character.
(b)
Landscaping, screening, and buffering of development in the I-1 Zone shall be provided in accordance with the provisions of the Landscape Manual. In addition, the following applies:
(1)
At least ten percent (10%) of the net lot area shall be maintained as green area.
(2)
Any landscaped strip adjacent to a public right-of-way required pursuant to the provisions of the Landscape Manual shall not be considered part of the required green area.
(3)
A vehicle towing station permitted in the I-1 Zone shall be screened by a wall or fence at least six (6) feet high, or by an evergreen screen, unless the adjoining property is used for a vehicle towing station or a vehicle salvage yard.
(c)
Outdoor storage.
(1)
Outdoor storage shall not be visible from a street.
(d)
Uses.
(1)
The uses allowed in the I-1 Zone are as provided for in the Table of Uses (Division 3 of this Part).
(e)
Regulations.
(1)
Additional regulations concerning the location, size, and other provisions for all buildings and structures in the I-1 Zone are as provided for in Divisions 1 and 5 of this Part, the Regulations Tables (Division 4 of this Part), General (Part 2), Off-Street Parking and Loading (Part 11), Signs (Part 12), and the Landscape Manual.
(CB-1-1989; CB-12-1991; CB-30-1992; CB-129-1994)